The DMT consists of a stainless steel blade with a thin flat circular expandable steel membrane on one side. When at rest, the external surface of the membrane is flush with the surrounding flat surface of the blade. The blade is connected to a control unit on the surface by a nylon tube containing an electrical wire and is pushed into the ground using the CPT rig.  At 0.2m depth intervals pushing is stopped and the membrane is inflated by means of pressurized gas.  Readings are taken of the A pressure required to just begin to move the membrane and of the B pressure required to move its centre 1mm horizontally into the soil. An optional C pressure can also be measured. These readings are automatically recorded and saved by the DMT software. The main application of the DMT is to estimate settlements … Continue reading Flat Dilatometer Test (DMT)